 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Infrared Remote-control Receiver Module IRM-26xxT-E SERIES Features * Photo detector and preamplifier in one package * Internal filter for PCM frequency * Improved inner shielding against electrical field disturbance * TTL and CMOS compatibility * Low power consumption * Improved immunity against ambient light * Suitable burst length 10 cycles/burst * Pb free * BiCMOS manufacture IC ; ESD HBM>4000V ; MM>250V * The product itself will remain within RoHS compliant version. * Improve 30 degree transmission distance. Descriptions The IRM-26xxT-E is miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.IRM-26xxT-E is the standard IR remote control receiver series, supporting all major transmission codes. Applications Light detecting portion of remote control AV instruments such as Audio, TV, VCR, CD, MD, etc. Home appliances such as Air-conditioner, Fan , etc. The other equipments with wireless remote control. CATV set top boxes Multi-media Equipment PART Chip Compound MATERIAL Silicon Epoxy COLOR Black Black Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 1 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Package Dimensions Unit:mm Notes: 1.All dimensions are in millimeters. 2.Tolerances unless dimensions 0.3mm. Available Types For Different Carrier Frequencies Type IRM-2636T-E IRM-2638T-E IRM-2640T-E IRM-2656T-E Carrier Frequencies (Typ) 36 kHz 38 kHz 40 kHz 56 kHz Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 2 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Absolute Maximum Ratings (Ta=25) Parameter Supply Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Vcc Topr Tstg Tsol Rating 0~6 -25 ~ +80 -40 ~ +85 260 Unit V 4mm from mold body less than 10 seconds Notice Recommended Operating Condition Supply Voltage Rating: Vcc 4.5V to 5.5V Electro-Optical Characteristics (Ta=25, and Vcc=5V) Parameter Consumption Current Peak Wavelength Reception Distance Half Angle(Horizontal) Half Angle(Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Symbol Icc p L0 L45 h v TH TL VH VL MIN. ----14 6 ----400 400 4.7 --TYP. 1.0 940 ----45 45 --------MAX. 1.2 ----------800 800 --0.5 deg deg s s V V At the ray axis *2 At the ray axis *1 Unit mA nm m Condition No signal input Notes: *1:The ray receiving surface at a vertex and relation to the ray axis in the range of = 0 and =45. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 3 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Test Method The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. Measurement place A place that is nothing of extreme light reflected in the room. External light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee10Lux) Standard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be p=940nm,=50nm. Also, photodiode is used of PD438B(Vr=5V). (Standard light / Light source temperature 2856K). Measuring system According to the measuring system shown in Fig.-3 Block Diagram Vs IN Input CGA & filter Demodulator OUT C Oscillator Carrier frequency f0 AGC/ATC & digital control Modulated IR signal min 10 pulses GND Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 4 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Application Circuit RC Filter should be connected closely between Vcc pin and GND pin. Fig.-1 Transmitter Wave Form D.U.T output Pulse Duty=0.5 Fig.-2 Measuring Method mc02 Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 5 of 10 Prepared by Zhang Meijuan tuoV noitceriD lacitreV & latnoziroH fO elgnA : ccV DNG TUO ecnatsiD noissimsnarT :L T.U.D ECIVED FO ESLUP TUPTUO rettimsnarT dradnatS .tcudorp hcae fo ycneuqerf retnec ot detsujda si ycneuqerf reirraC V1.0 0.5+ tuoV epocsollicsO Fu01 k01 1 0 0 k rettimsnarT dradnatS MROF EVAW TUPTUO RETTIMSNAT RI Fig.-3 Measuring System EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES The Notice of Application: Transmission of remote control signal consist of four parts: Encode Part, IR Transmitter Source, IRM device, Decode Part 1. When IRM-26xxT-E SERIES code select frequency, it need to well understand the center system of encode part. 2. Strong or weak light of IR Transmitter can affect distance of transmission. 3. When using IRM-26xxT-E SERIES device, it requires the composition of code pattern to reach the demand as follows: Minimum tburst ( number of pulses per burst) 10 pulses Minimum tburst_gap ( number of pulses between two burst) 14 pulses Minimum tpause 25 msec 4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range. If the above items hardly assure of its application, it'll cause NG(no good) message from the edge of signal. IRM-26xxT-E SERIES Code Property: Data format NEC RC5 _ Philips RC6 _ Philips RCA _ Thomson Toshiba Sharp JVC O O O X O O O Data format Sony 12 Bit Sony 15 Bit Sony 20 Bit Matsushita Mitsubishi Zenith High data rate (4000 bit/s) O X X O O O X Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 6 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Typical Electro-Optical Characteristics Curves Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Direction Transmission Distance vs. 100 Relative Transmission Distance (%) -E 80 60 Original 40 20 0 -60 -40 -20 0 20 40 60 Angle (deg) Fig.-6 Output Pulse Length vs. Arrival Distance Fig.-7 Arrival Distance vs. Supply Voltage Output Pulse Width TWL (sec) Transmission Distance Lc (m) Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 61 41 21 01 8 6 4 2 0 Rev 1 Page: 7 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Typical Electro-Optical Characteristics Curves Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency IRM-2636T-E IRM-2638T-E IRM-2640T-E IRM-2656T-E Relative Transmission Distance (%) Relative Transmission Distance (%) Center Carrier Frequency (kHz) Center Carrier Frequency (kHz) Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 8 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Typical Electro-Optical Characteristics Curves Fig.-9 Arrival Distance vs. Ambient Temperature 5.71 Transmission Distance Lc (m) Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Items Test Conditions 1 cycle -40 Temperature cycle +100 n=22,c=0 Failure Judgement Criteria Samples(n) Defective(c) High temperature test Vcc:6V 1000hrs Low temperature storage High temperature High humidity Temp: -40 1000hrs Ta: 85,RH:85% 1000hrs Temp: 2605 10sec 4mm From the bottom of the package. Solder heat Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 0.4 1 5.3 5.0 1 0.7 Ambient Temperature Ta (C) (15min)(5min)(15min) 300 cycle test Temp: +100 L0 Lx0.8 L45 Lx0.8 n=22,c=0 n=22,c=0 L: Lower specification limit n=22,c=0 n=22,c=0 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 9 of 10 Prepared by Zhang Meijuan EVERLIGHT ELECTRONICS CO.,LTD. IRM-26xxT-E SERIES Packing Quantity Specification 1. 1500 PCS/1Box 2. 10 Boxes/1Carton Label Form Specification CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: None REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place IRM-2636T-E Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device NoSZDMO-026-072 http:\\www.everlight.com Prepared date5-Apr-2007 Rev 1 Page: 10 of 10 Prepared by Zhang Meijuan |
Price & Availability of IRM-2636T-E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |